Screen Cylinder for Membrane Bioreactors (MBRs)

Membrane bioreactors (MBRs) play an important role in municipal wastewater treatment, as time goes by, the accumulation of hair will reduce the efficiency of the whole system. Therefore, membrane bioreactor has to completely replace the membrane, which undoubtedly increases the cost of the product.

There are many ways to solve this problem, the most common is to use hair pretreatment. The filtration accuracy of most pre-treatment fine screens is 800-6500 microns, but it is well known that the fineness of human hair is between 17 and 180 microns, which obviously can not achieve the qualified filtering effect.

In 2007, Bluslot filter developed a new wedge wire drum screen for municipal wastewater treatment, with a gap size of 50-80 microns (the minimum gap has exceeded 10 μ m in 2016).

This new type of drum screen is welded by special V-shaped wire and T-shaped support rod, and only two points contact with impurities. It is not easy to block and clean. It is a perfect solution for urban sewage.

The large flow capacity is also a big advantage of the bluslot wedge wire screen drum. Compared with the traditional punching screen barrel, the V-shaped wire makes it have a continuous slotting structure, so it has a larger opening area. The low-pressure drop also makes it more energy efficient.

The operating cost of MBR systems has always been a topic of concern to users. How to save the operating cost in the direction of global producers. Bluslot has reached cooperation with MBR systems suppliers in more than 20 countries, and the Blu series of wedge wire screen basket has been welcomed by users all over the world.

After years of product improvement and upgrading, at present, our products can reduce the operating cost of MBR systems by 30%. With the deepening of our research and development, I think this value will increase.